Description

SOLVENT & WATERBORNE SPRAY GUN CLEANER

SOLVENT SPRAY GUN CLEANING (left side)

• Automatic Cleaning
• 14 L (3.7 gal) of wash solvent is pumped through 14 jets to flush the fluid passage and exterior of 2 spray guns in under 1 minute.
• A final rinse of 100cc of clean solvent and an air flush completes automatic cleaning.
•  Automatic Cleaning is faster than cleaning by hand, allowing more cars to be painted each day.
•  Automatic Cleaning provides a consistent result as opposed to cleaning by hand.
•  Additional manual cleaning, when required, is provided by a flow-through brush. Solvent flow is activated by a foot pedal.
•  Automatic cleaning greatly reduces the Painter’s exposure to solvent for a healthier environment.
• Spray guns are cleaned with solvent in an enclosed tank; the operation is “Hands Free”. The vent automatically extracts fumes when the lid is raised.
• If the lid is accidentally raised during cleaning, the operation stops to prevent solvent exposure.
• Wash solvent is reused until it is dirty, reducing solvent consumption, a “Green” approach. Wash solvent
  can also be recycled in a Uni-ram solvent recycler and then reused.

WATERBORNE SPRAY GUN CLEANING (right side)

• Manual Cleaning
• Waterborne spray guns are cleaned effectively with 3 cleaning tools.
• The wash gun delivers high-pressure water to flush the fluid passage in under 15 seconds.
• The flow-through brush removes paint from the outside of the spray gun.
• Air gun dries the spray gun.
• The cleaning power of water is enhanced by the addition of AQUA-KLEEN, Uni-ram’s cleaner.
• The used water can be recovered and reused, reducing wastewater consumption and disposal costs; it is a “Green” approach.

UG5000W Common Features
• CE Approved.
• Complete with pressure regulator. Minimum air pressure is 6 bar (85 psi).
• Dimensions: 119 cm w x 43 cm d x 117 cm h
Dimensions: 47″ w x 17″ d x 46″ h
Weight: 77 kg (170 lb)